Adjusting The Reference Pitch Of The Tuner - Zoom Handy recorder H2 Operation Manual

Tuning an Instrument
Adjusting the reference
pitch of the tuner
When the H2 is in the default condition, the
tuner reference pitch is set to center A = 440
Hz. You can adjust the reference pitch over
the following range: center A = 435 - 445 Hz.
NOTE
The steps described here cannot be
performed while the recorder is operating.
Stop recording or playback before carrying out
these steps.
1.
Bring up the main menu screen.
At the stereo mode or 4-channel mode top
screen, press the 4 (MENU) key.
2.
Bring up the TUNER screen.
Repeatedly press the 3 (REW)/2 (FF)
keys to move the cursor to "TUNER" and
press the 5 (REC) key. The screen for
making tuner settings comes up.
3.
Bring up the TUNER CALIB
screen.
Move the cursor to "CALIB" and press the 5
(REC) key. The TUNER CALIB screen for

adjusting the reference pitch of the tuner

comes up.
66
4.
Select the reference pitch.
Use the 3 (REW)/2 (FF) keys to select a
setting in the range from 435 (center A = 435
Hz) to 445 (center A = 445 Hz), and press the
5 (REC) key. The setting is made and the
TUNER screen appears again.
The setting made here applies to all files and
operation modes. The setting is stored also
when the unit is turned off.
5.
Return to the top screen.
Repeatedly press the 4 (MENU) key until
the stereo mode or 4-channel mode top screen
appears again.
ZOOM H2