Voice Dial Operation; Dialing A Number Using Direct Dial Input; Bluetooth Audio Function; Bluetooth Audio Operation - Alpine IXA-W407 Owner's Manual

Voice Dial Operation

You can call the telephone by performing voice operation.
Setting item: Voice Dial
1
Touch [Voice Dial].
A message is displayed.
2
Touch [YES] to activate the voice dial mode.
The voice dial mode is activated, and "SPEAK" is displayed.
• Touch [NO] will return to the Telephone Menu screen.
3
Say the telephone number*, name* you want to call
into the microphone.
* The number, name depends on the voice dial information stored in
the mobile phone.
• If the voice dial fails, the unit will return to normal mode in
30 seconds.
• You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible
with the voice dial, "FAILED" is displayed for 2 seconds.
• The Voice Dial function performance depends on the recognition
range of the mobile phone and mounting location of the microphone.
Note when the microphone is mounted.
• If a called person that you say is not found, "FAILED" is displayed
for 2 seconds.
• This operation cannot be performed when the current source is
BLUETOOTH Audio, and "FAILED" is displayed for 2 seconds.
• Voice dial operation depends on the function of the mobile phone.
For details, refer to the Owner's Manual of the mobile phone.

Dialing a Number Using Direct DIAL INPUT

You can place a call by inputting the telephone number directly by the
numeric keypad screen on the unit.
The numeric keypad screen is displayed. Touch (input)
the telephone number, and then touch [
The call is placed.
• About the numeric keypad
[ ]: closes the numeric keypad input screen.
[DEL ALL]: deletes all input numbers.
[ ]: deletes a previous number.
• The speed dial is recalled and the telephone is called by directly
inputting the number which is registered with the speed dial on the
mobile phone on the numeric keypad screen of this unit (SPEED
DIAL).

BLUETOOTH Audio Function

BLUETOOTH Audio Operation

Audio information of a BLUETOOTH compatible mobile phone, a
portable player, etc., is controllable/playable wirelessly* from this unit.
* To play back audio, a mobile phone or a portable player conforming
to A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
• During a call, sound on the BLUETOOTH audio source is muted.
Recalling the BLUETOOTH audio source
1
Press
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you slide the display, the mode switches
circularly in the following order :
Audio/Visual
Multi Info
3
Slide the display vertically with your finger, or press
SOURCE repeatedly to select BT AUDIO source.
4
Touch the BT AUDIO source window displayed in
the center of the screen.
The BT AUDIO source is activated and the display changes
to the BT AUDIO main screen.
Selecting the desired Song
Touch [
Returns the beginning of the song being played back.
Touch [
].
Forwards the next song.
Pausing
Touch [
A playback stops. Touching again will resume a playback.
SOURCE to activate mode switching
Navigation Camera
Audio/Visual
].
].
].
Telephone
43
-EN