Renault Clio Workshop Repair Manual page 75

SIDE
FAULT FINDING - INTERPRETATION OF FAULTS
DF039
present
NOTES
Lock the computer using the fault finding tool command.
Check that the driver's side sensor is connected correctly and check its connections.
Check the condition of the connections on the computer (tracks 20 and 21).
Check the condition of the 50 track connector (locking system, connections,...).
Replace the wiring if the fault persists.
AFTER REPAIR
Air bags and seat belt pretensioners
Driver's side sensor circuit
None.
Reconnect the computer and the driver's side sensor then switch on the ignition.
Erase the computer memory then switch off the ignition Carry out a check using
the fault finding tool and, in the absence of a fault, unlock the computer.
WIRING
88-73
88
1AB8651.0