Passenger Air Bag Module - Renault Clio Workshop Repair Manual

Refitting
Ensure that the wheels are still straight.
Check that the mark "0" on the rotary switch is
correctly positioned opposite the fixed index (E).
IMPORTANT: If these procedures are not correctly
observed the systems may not operate correctly
or may be accidentally triggered.
Engage the assembly on the steering column and
connect the different connectors.
Carry out the rest of the refitting and only lock
bolt (C) once the two half cowlings have been re-
fitted, to position the stalks in alignment with the
instrument panel and the dashboard.
This operation is made easier by a cut-out giving
access to the bolt (C) in the lower half cowling.
Change the steering wheel bolt after each remo-
val (pre-bonded bolt) and observe its tightening
torque (4.5 daN.m).
Reconnect the air bag cushion and fix it to the
steering wheel (tightening torque : 0.5 daN.m).
press the connector in firmly on the cus-
NOTE :
hion side(D) (strong clipping system).
IMPORTANT
• To avoid damaging the rotary switch under the
steering wheel, the fixed position of the stee-
ring wheel must be maintained during the ope-
ration.
• If there is any doubt about whether the stee-
ring wheel is correctly centred, it must be remo-
ved for verification.
• In the event of an operation to remove the
steering, engine, transmission components etc,
where the steering rack and steering column
have to be separated, the steering wheel must
be immobilised using a "steering wheel
locking" tool.
Air bags and seat belt pretensioners
WIRING
IMPORTANT :
a check using the fault finding tool.
Unlock the computer if everything is correct,
otherwise see the"Fault Finding" section.

PASSENGER AIR BAG MODULE

Description
It is mounted in the dashboard opposite the front
passenger.
88-22
after refitting every thing, carry out
14091-1S
88