SIDE
FAULT FINDING - INTERPRETATION OF FAULTS
DF037
present
NOTES
This fault is normally present when the computer detects an inconsistency between the recognition signal
emitted by the side sensor and the programming which it has received.
Either the side sensor is not adapted to the vehicle, or the computer comes from another vehicle.
If the sensor has been replaced, fit another sensor adapted to the vehicle.
If the computer comes from another vehicle, use the "Side sensor programming" command on the fault
finding tool to change the computer's programming.
AFTER REPAIR
Air bags and seat belt pretensioners
Driver's side sensor identification
None.
Erase the computer memory then switch off the ignition
Carry out a check using the fault finding tool and, in the absence of a fault,
unlock the computer.
WIRING
88-71
88
1AB8651.0