Brother MFC-7360 Basic User's Manual page 51

Turning on the Remote Codes
You need to turn the Remote Codes setting to
on to use the Fax Receive Code and
Telephone Answer Code.
a
Make sure you are in Fax mode
b
Press Menu 2, 1, 4.
c
Press a or b to choose On.
Press OK.
d
If you do not want to change the Remote
Activation Code, press OK.
e
If you do not want to change the Remote
Deactivation Code, press OK.
f
Press Stop/Exit.
Telephone and external devices
Changing the Remote Codes
6
The preset Remote Activation Code is l51
(l91 for New Zealand). The preset Remote
Deactivation Code is #51 (#91 for New
Zealand). If you are always disconnected
when accessing your External TAD, try
.
changing the three-digit remote codes, for
example ### and 555.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 4.
c
Press a or b to choose On or Off.
Press OK.
d
If you chose On in step c, enter the new
Remote Activation Code.
Press OK.
e
Enter the new Remote Deactivation
Code.
Press OK.
f
Press Stop/Exit.
6
.
6
41