Appendix; Resetting The P-Touch; Troubleshooting - Brother P-TOUCH 7500 User Manual

6
6

Appendix

Resetting the P-touch

You can reset the internal memory of your P-touch when you want to clear all saved
label files, or in the event the P-touch is not working properly.
Turn off the machine and then while holding down g and R, press o to turn
1
the machine back on.
Release g and R.
2
The P-touch turns on with the internal memory reset.
☞ Release o before releasing the other keys.
☞ All text, format settings, option settings and stored label files are cleared when you
reset the P-touch. Language and unit settings will also be cleared.

Troubleshooting

Problem
The screen 'locks', or the
P-touch does not respond
properly.
The display remains blank
after turning on the
power.
74
Cause
Is the AC adapter connected
correctly?
Are you using the correct AC
adapter?
Is the battery fitted correctly?
Is the rechargeable battery pack
charged sufficiently? (for PT-7600
only)
Solution
Resetting the P-touch
Refer to
on page 74 and reset the internal
memory to the initial settings. If
resetting the P-touch does not solve
the problem, disconnect the AC
adapter and remove the battery for
more than 10 minutes.
Check that the AC adapter designed
exclusively for your P-touch is
connected correctly.
Make sure that you are using the
AC adapter designed exclusively
for your P-touch (included in
package).
Remove and re-install the battery.
The rechargeable battery pack's
charge may be low. Charge the
rechargeable battery pack. (The
rechargeable battery pack's charge
may run low even when you are not
using the P-touch.)