Brother P-TOUCH 7500 User Manual page 89

Error Message
SET 24mm!
SET 18mm!
SET 12mm!
SET 9mm!
SET 6mm!
INSERT
TAPE CASSETTE!
TEXT TOO HIGH!
XX BLOCK
TEXT TOO LONG!
TEXT TOO LONG!
XX BLOCK
Cause
• This message appears if a
24-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 24-mm-wide
tape.
• This message appears if a
18-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 18-mm-wide
tape.
• This message appears if a
12-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 12-mm-wide
tape.
• This message appears if a
9-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 9-mm-wide tape.
• This message appears if a
6-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 6-mm-wide tape.
• This message appears if no
tape cassette is installed
when you try to feed the
tape, print or use the
Preview function.
• This message appears if the
size of the text is larger than
the width of the installed
tape.
• This message appears if the
length of the text is longer
than the label length that has
been set with the Length
function.
• This message appears if you
try to print a label that is
longer than the specified
block length.
Solution
• Install a 24-mm-wide tape
cassette.
• Install a 18-mm-wide tape
cassette.
• Install a 12-mm-wide tape
cassette.
• Install a 9-mm-wide tape
cassette.
• Install a 6-mm-wide tape
cassette.
• Install a tape cassette and try
again.
• Reduce the size of the
characters, install a tape
with a greater width, or
select the AUTO text size
setting.
A
• Press , and then select a
longer label length.
• Select a longer block length.
79