Registering A Caller Id Number - Brother FAX-202 Owner's Manual

Registering a Caller ID Number

You can set up a caller in the Caller ID Log as a One Touch or Speed Dial number.
1
Press Hold.
2
After 2 seconds, press
through the Log and when you see a caller
you want to register, press Function/Set.
3
To register the caller as a One Touch
number, press the One Touch key where you
want the number to be stored.
—OR—
To register the caller as a Speed Dial number,
press Search/Speed Dial and use the dial
pad to press the two-digit location code (01–
08 or 01-12 or 01-50), and press
Function/Set.
If the LCD shows REGISTERED, the auto dial location already has a number.
4
Enter the caller's name and press Function/Set.
5
Press or
FAX
TEL
FAX/TEL
CHAIN
6
Press or
Function/Set.
7
Return to Step 2 to store another auto dial number—OR—Press Stop to exit.
8 - 4
T E L E P H O N E S E R V I C E S
or to scroll
to select the type of number and press Function/Set:
A fax number
A telephone (voice) number
Both a fax and telephone number
A number, usually an access code, for chain dialing
to select if you set ANTI-JUNK to ON (or OFF) and press
CALLER ID LOG
PRESS START KEY
SELECT < - - > & SET
03)ABC COMPANY
03)9087772837
03)02/01 12:00
DIAL:PRESS START
NAME:
ENTER & SET