Brother P-Touch 2730 User Manual page 78

TROUBLESHOOTING
Problem
The P-touch stops
while printing a label.
The label is not cut
automatically.
Label files saved
previously are now
empty.
74
What to do when...
• Replace the tape cassette if striped tape is visible, as this
indicates that you have reached the end of the tape.
• Replace all batteries or connect the AC adapter directly to
the P-touch.
• Check that the Cut Option setting is not set to Chain or No
Cut, as the tape will not be fed after printing the label.
Alternatively, hold down the Shift key and press the
Preview key to feed and cut the tape.
All files stored in the internal memory are deleted if the
batteries are weak or the AC adapter was disconnected.
Solution