Setting Label Attributes - Brother P-Touch 2730 User Manual

Using the Label key, you can create a label with a frame around the text and specify
the label length and tab length. (Cut Options which may be needed when printing a
label can also be set by using the Label key. Refer to "Tape Cutting Options" on
page 57.)
1
Press the Label key.
The current settings are displayed.
2
Select an attribute using the
a value for that attribute using the
• When setting the tab length, hold down the
to change the value faster.
• When setting the label length, refer to "Adjusting the
Label Length" on page 59
3
Press the OK or Enter key to apply the settings.
New settings are NOT applied if you do not press the OK
or Enter key.
• Press the Escape key to return to the previous step.
• Press the Space key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.

Setting Label Attributes

or key, and then set
or key.
or key
Setting Label Attributes
1
2
3
4
5
6
7
8
9
35