Entering Bar Code Data - Brother P-Touch 2730 User Manual

Entering Bar Code Data

1
Press the Bar Code key.
The Bar Code Input screen is displayed.
• Up to five bar codes can be entered on a label.
2
Type in the bar code data. Special characters can be
entered in the bar code when using the CODE39,
CODABAR, CODE128 or GS1-128 (UCC / EAN-128)
protocols. When not using special characters, go to
step 5.
3
Press the Symbol key. A list of characters available for the current protocol is
displayed.
4
Select a character using the
the OK or Enter key to insert the character in the bar
code data.
5
Press the OK or Enter key to insert the bar code in the
label.
The bar code is displayed on the text entry screen.
• Press the Escape key to return to the previous step.
• Refer to the Special Characters List table for a list of all available settings.
CODE39
Code
0
1
2
3
4
5
6
or
Special Character List
Special Character
(SPACE)
key, then press
CODABAR
Code
0
1
2
3
4
5
Special Character
Creating a Bar Code Label
1
2
3
4
5
6
7
8
9
51