Table of Contents
Advertisement
Part 5: Maintenance
9.Head
Temperature
Error
<Corrective Action>
When you use two BJ cartridges on both the right and left sides, follow the flow below for each BJ
cartridge.
Turn off the power with
the POWER button,
and wait several
minutes.
Remove/install
the BJ cartridge.
Power on
Error
displayed ?
Yes
1. Replace
the ink cartridge.
2. Replace
the BJ cartridge.
Check the
connector cable.
Correct ?
Yes
Replace
the logic board.
<Cause>
The head temperature is abnormally high.
<Suspected Parts>
Since the head temperature may be very high,
do not touch the carriage.
No
END
Faulty BJ cartridge connection
Carriage ribbon cable
No
Replace
the carriage unit.
5-22
BJ cartridge, logic board
BJC-5000
Advertisement
Table of Contents
