Scanning And Saving The Image - Canon BJC-3000 User Manual

Scanning and Saving the Image

This section describes the basic operation procedures from launching the IS Scan software (IS Scan
Plus for Windows or IS Scan for Macintosh) to scanning and saving the image.
1
Remove the BJ Cartridge installed in the car-
tridge holder and then install the Color Image
Scanner Cartridge IS-32.
Make sure that the printer is switched on and open the
front cover of the printer. Remove the BJ Cartridge
installed in the cartridge holder.
Store the removed BJ Cartridge in the BJ Cartridge con-
tainer.
Install the Color Image Scanner Cartridge IS-32.
Make sure that the paper thickness lever is set to the Up
position.
Close the front cover.
Before closing the front cover of the printer, make sure
that the paper thickness lever is set to the Up position. If
you scan the image with the paper thickness lever set in
the Down position, scanning results may be unsatisfacto-
ry.
2
Launch the IS Scan Software.
Select Programs from the Start menu. Point to IS Scan
Plus, then select IS Scan Plus. The Main menu of IS Scan
Plus screen appears.
Double-click IS Scan BJC-3000 in the folder you specified
during the installation procedure. The Main dialogue box of
IS Scan appears.
42