P. DC Power Supply Assembly
1. Removing the DC Power Supply Assembly
1) Remove the upper left cover and the lower left cover.
2) Remove the nine mounting screws
plate
.
3) Disconnect the nine connectors (J303, J304, J305,J306, J308, J309, J311, J312,
relay connector).
4) Remove the two mounting screws
together with its mount.
COPYRIGHT © 1997 CANON INC.
, and remove the DC power supply protection
Figure 7-466
, and remove the DC power supply PCB
Figure 7-467
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
7-47