Setting Images/Functions And User Mode - Canon NP6045 Service Manual

CHAPTER 8 INSTALLATION
I. Setting Images/Functions and User Mode
No.
1 Connect the power plug to the power
outlet, and insert the door switch
actuator into
assembly of the front door.
2 Slide out the holding tray and the
holding tray feeding assembly; then,
check to make sure that there is no
foreign matter and the parts are free
of damage.
3 Slide out the paper deck and the
cassette to the front, and remove the
packing material.
4 Turn ON the power switch.
5 Set the size guide plate to suit the
user's needs.
6 Put copy paper in the cassette and
the paper deck.
7 Attach the appropriate stickers to the
paper size plate of the cassette and
the paper deck.
8 Push in the cassette and the paper
deck into the copier.
9 Insert the copy tray into the copier.
8-24
COPYRIGHT © 1997 CANON INC.
Work
the door switch
Checks/remarks
Make sure all packing material has been
removed before turning on the power.
• Adjust the Contrast key so that the display on
the control panel has appropriate contrast for
good viewing; explain to the user how this
may be done.
• Check that the Add Paper indicator turns ON.
• Press keys on the keypad and the Clear key
to make sure that the copy count is correct.
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)