Mp3/Wma; Playback; Selecting Folders; Playing Mp3/Wma Data - Alpine DVA-5210 Owner's Manual

MP3/WMA

SETUP
LIST
RETURN
:/J
g
FOLDER 8
FOLDER 9
REPEAT
M.I.X.

Playback

The DVA-5210 will play back MP3/WMA files stored on CD-ROMs,
CD-Rs, and CD-RWs. The format used must be compliant with ISO
9660 level 1 or level 2.
For further information about playing or storing MP3/WMA files,
refer to pages 16 and 17 before using the unit.
A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
1
Insert a disc containing an MP3/WMA file with the
label side facing up.
To load discs, see "Loading and Unloading Discs" on
page 9.
Playback starts. The front panel MP3/WMA indicator lights
in amber during playback.
2
Press g or f to select the desired track.
Returning to the beginning of the current track:
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track :
Press f.
Fast forward :
Press and hold f.
3
To pause playback, press -/J.
Pressing -/J again will resume playback.
• MP3/WMA playback information (folder no., file no., tag
information, etc.) will be displayed on the monitor during
playback.
• The CD-player can play discs containing audio data, MP3 data
and WMA data.
• For MP3 discs, some time may be required until playback starts.
• Some discs will not play back depending on the writing or MP3
conversion software used for the disc. In that case, try other
software.
• The unit will fast backward only the current track.
• No sound is output during fast forward/fast backward.

Selecting Folders

Press FOLDER 8 or FOLDER 9 to select the folder.

Playing MP3/WMA Data

The unit can be set to play only the audio data or only the MP3/WMA
;
files on discs containing both audio data and MP3/WMA data (when
using discs containing both audio data and MP3/WMA data).
8
:
1
Press SETUP before inserting a disc.
ENT.
The setup menu appears on the monitor screen.
9
f
L S E T U P
DVD SETUP
L A N G U A G E S
T V S C R E E N
C O U N T R Y
P A R E N T A L
P L A Y
D I G I T A L
C U S T O M
2
Press 8 or 9 to select "PLAY MODE".
3
Press ;, : or ENT. to select CD-DA or MP3/WMA.
CD-DA:
Plays only audio data on discs containing both audio data and
MP3/WMA data.
The initial setting at the factory is CD-DA.
MP3/WMA:
Plays only MP3/WMA files on discs containing both audio data
and MP3/WMA data.
4
Press SETUP.
The settings are stored and the setup mode is
deactivated.
• If a disc has already been inserted, perform the setting after you
remove the disc.
:
1 6 : 9
C O D E 6 8 6 9
O F F :
M O D E C D - D A
O U T A U T O
S E T U P :
15
-EN