Network Settings - NEC NP-P401W User Manual

NETWORK SETTINGS

• SETTINGS
WIRED or WIRELESS
SETTING
APPLY
DHCP ON
DHCP OFF
IP ADDRESS
SUBNET MASK
GATEWAY
WINS
AUTO DNS ON
AUTO DNS OFF
Setting for WIRED LAN
PROFILE 1/PROFILE 2
DISABLE
Setting for WIRELESS LAN (the optional Wireless LAN Unit required)
EASY CONNECTION
SIMPLE ACCES POINT
WPS
CHANNEL
Set for wired LAN or for wireless LAN.
Apply your settings to wired LAN or wireless LAN.
Automatically assign IP address, subnet mask, and gateway to the projector from your
DHCP server.
Set IP address, subnet mask, and gateway to the projector assigned by your network
administrator.
Set your IP address of the network connected to the projector.
Set your subnet mask number of the network connected to the projector.
Set the default gateway of the network connected to the projector.
Set the IP address of your WINS server of the network connected to the projector when
[DHCP] is turned on, this option is not available.
DHCP server will automatically assign IP address of DNS server connected to the
projector.
Set your IP address of DNS server connected to the projector.
Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2.
Turn off wired LAN connection
Execute a wireless LAN using EASY CONNECTION.
Set the projector for simple access point.
Use WPS (Wi-Fi Protected Setup™) to set up the wireless LAN for the projector.
NOTE: Use the projector's menus to make WPS connections and change the WPS
profile settings.
Select a channel. Available channels vary depending on the country and region. When
you select [INFRASTRUCTURE], make sure that the projector and your access point
are on the same channel; when you select [AD HOC], make sure that the projector and
your computer are on the same channel.
45
3. Convenient Features