❻ Menu Descriptions & Functions [Setup]; [General] - NEC NP-P401W User Manual

❻ Menu Descriptions & Functions [SETUP]

[GENERAL]

Correcting Keystone Distortion Manually [KEYSTONE]
You can correct horizontal or vertical keystone, pincushion, or cornerstone distortion manually.
NOTE:
• Some items are not available when one item is activated. Unavailable items are shown in grey.
• To change from one item to another item, reset the first item.
• Adjustment values will be overwritten. They will not be deleted even when the projector is turned off.
• Using [KEYSTONE] correction can cause the image to be slightly blurred because the correction is made electronically.
KEYSTONE HORIZONTAL ��������� Corrects horizontal keystone distortion� (→ page 24)
KEYSTONE VERTICAL��������������� Corrects vertical keystone distortion� (→ page 24)
PINCUSHION LEFT/RIGHT �������� Corrects pincushion distortion at the left or right side�
PINCUSHION TOP/BOTTOM ����� Corrects pincushion distortion at the top or bottom side�
CORNERSTONE ������������������������ Fits a projected image within the border of the screen easily by align the four corner of an image
RESET ��������������������������������������� Returns all the above items to the factory preset values�
Correcting pincushion distortion
NOTE:
• The [PINCUSHION LEFT/RIGHT] or [PINCUSHION TOP/BOTTOM] item is not available when [KEYSTONE HORIZONTAL], [KEY-
STONE VERTICAL] or [CORNERSTONE] is activated.
• Before performing correction, set the lens shift to the center position.
1. Press the ▼ or ▲ button to select [PINCUSHION LEFT/RIGHT] or [PINCUSHION TOP/BOTTOM].
2. Press the ◀ or ▶ button to correct distortion.
3. Press ENTER button.
to the ones of the screen� (→ page 36)
101
5. Using On-Screen Menu