NEC NP-P401W User Manual page 182

TIP:
Uninstalling Software Program
Preparation:
Exit the software program before uninstalling. To uninstall the software program, the Windows user account must have
"Administrator" privilege (Windows 8, Windows 7 and Windows Vista) or "Computer Administrator" privilege (Windows
XP).
• For Windows 7/Windows Vista
1 Click "Start" and then "Control Panel".
The Control Panel window will be displayed.
2 Click "Uninstall a program" under "Programs"
The "Programs and Features" window will be displayed.
3 Select the software program and click it.
4 Click "Uninstall/Change" or "Uninstall".
• When the "User Account Control" windows is displayed, click "Continue".
Follow the instructions on the screens to complete the uninstallation.
• For Windows XP
1 Click "Start" and then "Control Panel".
The Control Panel window will be displayed.
2 Double-click "Add / Remove Programs".
The Add / Remove Programs window will be displayed.
3 Click the software program from the list and then click "Remove".
Follow the instructions on the screens to complete the uninstallation.
Connect the projector to the computer
1 Use the supplied computer cable (VGA) to connect the COMPUTER IN connector of the projector directly
with the monitor output connector of the computer.
2 Connect the supplied power cord to the AC IN of the projector and the wall outlet.
The projector is in the standby condition.
TIP:
• When Virtual Remote Tool starts for the first time, "Easy Setup" window will be displayed to navigate your connections.
Supplied computer cable (VGA)
AC Input
Power cord (supplied)
170
8. User Supportware
→ To wall outlet