❹ Selecting A Source; Selecting The Computer Or Video Source - NEC NP-P401W User Manual

❹ Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the SOURCE button once.The projector will search for the available
input source and display it. The input source will change as follows:
COMPUTER → HDMI1 → HDMI2 → VIDEO → S-VIDEO → VIEWER →
USB DISPLAY → COMPUTER → ...
• With the SOURCE screen displayed, you can press the SOURCE
button a few times to select the input source.
• The Viewer and Network sources are not supported by PE501X.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the COMPUTER 1, HDMI, VIDEO, S-VIDEO, VIEWER,
NETWORK, or USB DISPLAY buttons.
NOTE: The HDMI button on the remote control will toggle between "HDMI1" and
"HDMI2".
2. Projecting an Image (Basic Operation)
[P501X/P451X/P451W/P401W]
[PE501X]
17