❹ Changing Eco Mode/Checking Energy-Saving Effect; Using Eco Mode [Eco Mode] - NEC NP-P401W User Manual

2. Press the ▲▼◀▶ button.
The area of the magnified image will be moved
3. Press the D-ZOOM (−) button.
Each time the D-ZOOM (−) button is pressed, the image is reduced.
NOTE:
• The image will be enlarged or reduced at the center of the screen.
• Displaying the menu will cancel the current magnification.
❹ Changing Eco Mode/Checking Energy-Saving Effect

Using Eco Mode [ECO MODE]

The ECO MODE (NORMAL and ECO) increases lamp life, while lowering power consumption and cutting down on
CO emissions.
2
Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [NORMAL] and [ECO] modes.
[ECO MODE]
[OFF]
[AUTO ECO]
[NORMAL]
[ECO]
To turn on the [ECO MODE], do the following:
1. Press the ECO Button on the remote control to display [ECO MODE] screen.
2. Press the ECO button again to select a mode you wish.
• Each time the ECO button is pressed, the choices will be changed:
OFF → AUTO ECO → NORMAL → ECO → OFF
TIP:
• The leaf symbol at the bottom of the menu shows the current selection of ECO mode.
Description
The lamp brightness is 100%.
Lamp power consumption will be changed between
[OFF] and [NORMAL] automatically according to
picture level
NOTE: A bright gradation may be less visible depending
on the image.
Lamp power consumption. (approx.80% brightness
on P501X/P451W/PE501X and approx. 83% on
P451X/P401W) The lamp life will extend by lowering
the lamp power.
Lamp power consumption. (approx.60% brightness
on P501X/P451W/PE501X and approx. 67% on
P451X/P401W) The lamp life will extend longer than
the one on NORMAL mode by controlling power ap-
propriate for the lamp.The maximum power becomes
equivalent to the power in NORMAL.
30
3. Convenient Features
Status of LAMP indicator
Off
Steady Green
light