Lenovo ThinkCentre A85 Hardware Maintenance Manual page 99

Machine types: 0041, 0104, 0107, 0154, 0163, 7539, 7543 and 7548
Hide thumbs Also See for ThinkCentre A85:
Table of Contents

Advertisement

6. Slide the new hard disk drive into the hard disk drive bay and align the screw holes in the new hard
disk drive with the corresponding holes in the drive bay. Then, install the four screws to secure the
new hard disk drive in place.
Figure 26. Installing the hard disk drive
7. Connect one end of the signal cable to the rear of the new hard disk drive and the other end to an
available SATA connector on the system board. See "Locating parts on the system board" on page 70.
Then, locate an available five-wire power connector and connect it to the rear of the new hard disk drive.
Figure 27. Connecting a SATA hard disk drive
8. To complete the installation or replacement, go to "Completing the parts replacement" on page 98.
.
Chapter 8
Installing or replacing hardware: 0041, 0107, 0163, and 7543
91

Advertisement

Table of Contents
loading

Table of Contents