Adjusting The High Pass Filter; Turning Loudness On/Off; Other Functions; Displaying The Text - Alpine CDE-W203RI Owner's Manual

Setting the Treble Centre Frequency
2
-1 Press BAND/TA to select the desired treble centre
frequency.
10.0 kHz 12.5 kHz
Emphasises the displayed treble frequency ranges.
Setting the Treble Level
2
2
-2 Turn the Rotary encoder to select the desired
*
treble level (–7~+7).
You can emphasise the treble level.
3
Press and hold /ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• The treble level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW (LW), CD, etc.).
• The function is inoperable when DEFEAT is set to ON.
2
* The adjustment can also be made by pressing Rotary encoder. Refer
to "Adjusting Subwoofer Level/Bass Level/Treble Level/Balance
(Between Left and Right)/Fader (Between Front and Rear)/Defeat"
(page 15).

Adjusting the High Pass Filter

The High Pass Filter on this unit can be adjusted to suit your personal
taste.
1
Press SOUND repeatedly to select the HPF mode.
BASS TREBLE HPF
2
Turn the Rotary encoder to select the desired HPF
frequency.
OFF 60 Hz 80 Hz
All frequencies above the selected cutoff are output.
3
Press and hold /ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• The function is inoperable when DEFEAT is set to ON.

Turning Loudness On/Off

Loudness introduces a special low-and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
Press and hold Rotary encoder (LOUD) for at least
2 seconds to activate or deactivate the loudness mode.
• The function is inoperable when DEFEAT is set to ON.
16
-EN
15.0 kHz 17.5 kHz 10.0 kHz
BASS
100 Hz

Other Functions

SOURCE/

Displaying the Text

Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3/WMA/AAC files.
Press VIEW.
The display will change every time the button is pressed.
• When the TEXT SCR is set to SCR MANU, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time (except
Radio mode).
The display in Radio mode:
If there is PS (Programme Service Name)
PS (Programme Service Name)*
RADIO TEXT PS (Programme Service Name)
If there is no PS (Programme Service Name)
FREQUENCY CLOCK
The display in CD mode:
TRACK NO./ELAPSED TIME
2
TEXT (DISC NAME)*
TRACK NO./ELAPSED TIME
The display in MP3/WMA/AAC mode:
FILE NO./ELAPSED TIME
FILE NO./CLOCK FOLDER NAME
3
ARTIST NAME* ALBUM NAME*
FILE NO./ELAPSED TIME
The display in AUX mode:
AUX NAME AUX NAME/CLOCK
The display in BT AUDIO mode:
The Following display will be shown only when a telephone or
Bluetooth Streaming device with Metadata capabilities is
correctly connected with a Bluetooth INTERFACE (Alpine
KCE-400BT) (Sold Separately). (For details on Bluetooth
INTERFACE, refer to the Owner's Manual of KCE-400BT).
3
BT A* /ELAPSED TIME
4
ALBUM NAME* SONG NAME*
VIEW
1
CLOCK
RADIO TEXT FREQUENCY
CLOCK
2
TEXT (TRACK NAME)*
FOLDER NO./FILE NO.
FILE NAME
3
SONG NAME*
AUX NAME
BT A/CLOCK ARTIST NAME*
4
BT A/ELAPSED TIME
3
4