Table of Contents
Advertisement
COPYING MULTIPLE ORIGINALS
ONTO A SINGLE SHEET OF PAPER
Multiple originals can be copied onto a single sheet of paper in a selected layout pattern.
This function is convenient for compiling multi-page reference materials into a compact format, or for providing an
overview of all pages of a document on a single page.
2 IN 1 copy
Pattern 1
• First select the layout pattern as explained in "Setting the layout pattern" (p.32), and "Border line for 2 IN 1 / 4 IN 1"
Note
(solid line or broken line) in the user programs (p.40). When finished, follow the steps below.
• An appropriate ratio setting will be automatically selected based on the size of the originals, the size of the
paper, and the selected number of originals. When using the document glass, reduction is possible to 25%.
When using the SPF, reduction is possible to 50%. Certain combinations of original size, paper size, and
number of images may result in images being cut off.
• Even if "Rotation copy" is disabled in the user programs, the original images may be rotated if necessary
depending on their orientation and the orientation of the paper.
• 2 IN 1 / 4 IN 1 copy cannot be used in combination with dual page copying (p.27), XY Zoom (p.24), margin shift
(p.33), or erase copy. (p.34)
Using the document glass
1
Place the first original. (p.18)
2
Select the original size. (p.18)
If the original size was not selected, 2 IN 1 / 4
Note
IN 1 copy cannot be used.
3
Press the [2 IN 1 / 4 IN 1] key
(
/
) to select the desired mode.
4
Set the number of copies and other
settings, and then press the [START]
key (
).
The ORIGINAL DATA indicator (
and the original is scanned into memory.
Pattern 2
The mode is selected in
the order "2 IN 1"
(
), "4 IN 1" (
),
"Off".
) blinks,
DATA
(2 IN 1 / 4 IN 1 copy)
4 IN 1 copy
Pattern 1
Pattern 2
5
When the start indicator lights,
replace the original with the next
original, and then press the [START]
key (
).
Repeat step 5 until all originals have been
scanned into memory.
To clear the data in memory, press the
Note
[CLEAR] key
6
When all originals have been scanned,
press the [READ-END] key (
The copy is delivered to the paper output tray.
• To cancel 2 IN 1 / 4 IN 1 copying, press the
Note
[CLEAR] key
• To cancel 2 IN 1 / 4 IN 1 copy mode, press
the [2 IN 1 / 4 IN 1] key (
repeatedly until the 2 IN 1 / 4 IN 1 indicators
(
/
Using 2 IN 1 / 4 IN 1 copy in combination with
sort copy
Sort copy can be used if the original is placed on the
document glass. Press the [SORT/GROUP] key
(
/
) to select sort copy and then perform
steps 1 through 6. The 2 IN 1 / 4 IN 1 copies will be
sorted.
Pattern 3
Pattern 4
(
)
.
).
(
).
/
)
) are both off.
3
31
Advertisement
Chapters
Table of Contents
