Basic Operation
SOURCE
BAND
g DN
BASS C.
TREBLE C.
Setting the AUX Mode
(CDM-7874 only)
You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface
cable KCM-122B) to this component.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the g DN or f UP button to select
the AUX mode.
3
Press the BAND button to toggle the mode
between AUX ON and AUX OFF.
4
Press the SETUP button to return to normal
mode.
5
To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
→ TUNER → CD → AUX
NOTE
When AUX ON is selected, a CD Changer cannot be used.
6
-EN
Rotary encoder
f UP
DISP
SETUP
(CDM-7874)
2 2 2 2 2
g DN
BAND
1 1 1 1 1
CENTER f
Displaying Time
1
Press the DISP button repeatedly until the clock
time is displayed.
Each press changes the modes as follows:
Radio mode
Radio frequency
CDM-7874: CD Player and Changer modes
Playing time
→
mode
CDE-7872/CDE-7870: CD Player mode
Track No.
Playing time
→
→
mode
mode
NOTE
Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed for
about 5 seconds before the time returns to the display.
f UP
DISP
(CDE-7872/CDE-7870)
Clock priority
↔
mode
Clock priority
→
mode
Clock priority
→
mode