8.
IMAGE PROCESSING FUNCTIONS
8.1
Color/Monochrome Specification
The user can select Color, Monochrome, or Auto. If Auto is selected, the printer
automatically distinguishes each page and prints the page data in colors and
monochrome.
8.2
Paper Type Selection
The user can select Plain paper 1/Plain paper 2, Transparency, Thick paper 1/Thick
paper 2, Labels paper, Glossy paper, Postcard, Envelope, Thick paper (Back), Glossy
paper (Back), Postcard (Back), or Envelope (Back). However, FX full-color OHP (V556)
transparency is not available.
8.3
Toner Save
The toner consumption can be reduced to 70% (reference).
8.4
Color Matching
This function conforms to Windows ICM 2/Apple Color Sync 2.
8.5
Image Adjustment
The brightness, contrast, and saturation can be adjusted.
8.6
Color Adjustment
The RGB intensities can be adjusted individually.
8.7
Automatic Image Quality Correction
The automatic image quality correction function can be turned ON or OFF. The default is
OFF.
8.8
Recommended Image Quality Modes
1) Default display
Mode
Standard
High quality
High definition
Resolution
Use and processing
600dpi
General standard quality
This mode is suitable for printing ordinary business
documents. Photos, texts, and graphics are processed in
optimum ways. The printing speed is the highest in this
mode. (Default)
600dpi
General high quality
This mode is suitable for printing high-quality business
documents. Photos, texts, and graphics are processed in
optimum ways.
1200dpi
This mode is suitable for printing documents of mainly
fine lines. Fine characters, lines, or photo portions are
reproduced clearly.
I-12