Operation Procedure - Brother HL-4000CN Service Manual

4.5

Operation Procedure

After entering Diag. (C/E) mode, select a diagnostic item with the
press the Form Feed/Set button to determine the selection. If there is a lower menu,
select a diagnostic item with the
determine the selection. Once a diagnostic item has been selected, press the Form
Feed/Set button to execute the processing. To exit the diagnosis and return to the upper
menu, press the Job Cancel/Back button.
!
Example of operation for Digital Input Test (DI-31 REGI. SENSOR)
CE Maintenance
ESS Diag
CE Maintenance
IOT Diag
CE Maintenance
Print info
CE Maintenance
Complete
CE Maintenance
Installation Set
CE Maintenance
Test Print
CE Maintenance
Parameter
or button and press the Form Feed/Set button to
S
IOT Diag
Digital Input
C
IOT Diag
Digital Output
IOT Diag
NVM Settings
S
C
M
Fig.5-3
V-40
or
S
Digital Input
DI-1 OFF
M
Digital Input
DI-2 OFF
Digital Input
DI-31 OFF
Digital Input
DI-32 OFF
Digital Input
DI-55 OFF
Form Feed/Set button
Job Cance/Back button
Menu button
button and
S
Digital Input
DI-13 H 1
C