Edge Cover, Scanner Links And Their Guides - Brother MFC5200C Service Manual

6.1.11 Edge Cover, Scanner Links and Their Guides

(1) Remove four screws "x" and lift up the edge cover.
(2) Unhook the rear edges of the scanner link springs from the main cover, then remove the
scanner links.
(3) From each of the scanner link guides, remove screw "y." Pull up the rear end of each scanner
link guide (in the direction of arrow
(4) Remove the support chips. (For easier removal, access them from the inside of the main cover
after removing the main cover.)
Scanner link guide
Scanner link
Scanner link spring
Support chip
Main cover
) and slide the guide to the rear (arrow
Edge cover
"x"
"x"
"x"
"y"
6 -3 7
"x"
Scanner link spring
"y"
Support chip
"x" and "y": Taptite, cup B M3x10
).
Scanner link
Scanner link guide