Driver Pcb - Brother MFC5200C Service Manual

Hide thumbs Also See for MFC5200C:

Table of Contents

6.1.19 Driver PCB

(1) Disconnect the following flat cables and harnesses from the driver PCB:

- Head flat cable N (driver-carriage PCB)

- Head flat cable W (driver-head signal line)

- Carriage motor harness

- Ink empty sensor harness

- Paper feed motor harness

(2) Remove the four screws.

(3) Slide the driver PCB to the left (when viewed from the rear) and remove it from the main

Table of Contents