Cd/Mp3/Wma/Aac; Playback; Repeat Play; Random Play) - Alpine CDE-122 Owner's Manual

CD/MP3/WMA/AAC

Rotary encoder/
SOURCE/

The illustration is for CDE-123.

Playback

The following table shows which discs can be played on which models.
CD CD-TEXT
CDE-124SXM

/CDE-122
CDE-123

1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
• When a disc is already inserted, press SOURCE to switch to the
DISC mode.
2
While playing back MP3/WMA/AAC, press  or  to select
the desired folder.
3
Press  or  to select the desired track (file).
Pressing and holding  or  will fast backward/fast
forward track continuously.
4
To pause playback, press .
Pressing  again will resume playback.
5
To eject the disc, press .
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
• The "" indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs can not be used.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
12
-EN
/ENTER
MP3 WMA
 
  
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.

Repeat Play

1
Press a 4.

The song is played back repeatedly.
*1
 a
a
Only a track is repeatedly played back.
Only files in a folder are repeatedly played back. (MP3/WMA/
AAC mode only)
2
To cancel repeat play, select (off) with the above
procedure.

M.I.X. (Random Play)

1
Press 5s.
The songs are played back in random sequence.
*1
s  s ALL
AAC Only files in a folder are played back in random sequence.
(MP3/WMA/AAC mode only)
The tracks/files are played back in random sequence.
2
To cancel M.I.X. play, select (off) with the above procedure.


Searching for CD Text

On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
1
Press ENTER during play.
This will set the search mode, and the "" indicator lights up.
2
Turn the Rotary encoder to select the desired track, and
then press ENTER.
This will play the selected track.
Notes
• Press  in the search mode to cancel. Or, the search mode is canceled
if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
Folder/File Name Search (concerning MP3/
WMA/AAC)
Folder and file names may be searched and displayed during playback.

Folder Name Search mode

1
During MP3/WMA/AAC playback, press ENTER to
activate the search mode.
The "" indicator lights up.
2
Turn the Rotary encoder to select Folder Name Search
mode, and then press ENTER.
*2
 (off )  a
*2
 (off )  s