Brother FAX100 Service Manual page 100

Selector
No.
1
Off-hook alarm
2
Power failure report output
3
Clock/prompt alternate
4
indication on the LCD
5 Calendar clock type
Error indication in activity report
6
7 Non-ring reception
8 Not used.
Selectors 1 and 2: Off-hook alarm
These selectors activate or deactivate the alarm function which sounds an alarm when the
communication is completed with the handset being off.
Selector 3: Power failure report output
This selector determines whether or not the equipment outputs a power failure report when
the power is turned on.
Selector 4: Clock/prompt alternate indication on the LCD
If this selector is set to "1", the calendar clock and the prompt "INSERT DOCUMENT" ap-
pear alternately on the LCD while the equipment is on standby; if it is set to "0", only the
calendar clock appears.
Selector 5: Calendar clock type
If this selector is set to "0" (USA), the MM/DD/YY hh:mm format applies; if it is set to "1"
(European), the DD/MM/YY hh:mm format applies. Where, DD is the day, MM is the month,
YY is the last two digits of the year, hh is the hour, and mm is the minute.
Selector 6: Error indication in activity report
This selector determines whether or not a communications error code will be printed in the
activity report.
Selector 7: Non-ring reception
Setting this selector to "1" makes the equipment receive calls without ringer sound if the ring
delay is set to 0.
WSW17
(Function setting 2)
Function
V – 48
Setting and Specifications
No. 1 2
0 0 : No alarm
0 1 : Always valid
1 X : Valid except when
'call reservation'
is selected.
0: ON 1: OFF
0: OFF 1: ON
0: USA type 1: European type
0: NO 1: YES
0: OFF 1: ON