Colour Block Quality And Alignment Check - Brother FAX-1820C Quick Setup Manual

Colour Block Quality and
7
Alignment Check
1
After the cleaning cycle is finished, the LCD
shows;
Set Paper and
Press Start
2
Make sure the paper is loaded in the paper
tray.
Press Colour Start.
3
The machine starts printing the PRINT
QUALITY CHECK SHEET (only during
initial ink cartridge installation).
Check in Step A
Check in Step B
Step A: Colour Block Quality
Check
1
The LCD shows:
Is Step "A" OK?
1.Yes 2.No
Check the quality of the four colour blocks
formed by the short lines printed on the
sheet.
(BLACK/CYAN/YELLOW/MAGENTA)
2
If all lines are clear and visible, press
on the dial pad to go to STEP B: Alignment
Check.
---OR---
If you can see missing short lines, press
on the dial pad and go to
OK
3
The LCD asks you if the print quality is OK
for each colour. Press
dial pad.
Black OK?
1.Yes 2.No
When you have finished selecting
(YES) or
the LCD shows:
Start Cleaning?
1.Yes 2.No
Press (YES), and then machine starts
cleaning the colours.
After cleaning is finished, press
Colour Start. The machine starts printing
the PRINT QUALITY CHECK SHEET again
and goes back to the first step of STEP A.
3
.
Poor
or on the
(NO) for each colour,
9