GE GTDS850EDWS Installation Instructions Manual page 14

Remove and swap the cover cap and door handle from
the outer door:
A. Squeeze the tabs on the inside of the door handle
B. Squeeze the tabs on the inside of the cover cap.
C.
the handle so it curves to the inside.
D.
door where the handle was removed.
Installation Instructions Installation Instructions
the inner door back into the outer door with the screws
the side opposite the handle.
Mount the assembled door on the 2 upper left side hinge
screws installed in step 2.
Move the hinge screws loosened in step 3 into the lower
right side front panel holes.
NOTE: