GE GTDS850EDWS Installation Instructions Manual page 12

Remove and swap the 2 cover caps and door handle
from the outer door:
A. Squeeze the tabs on the inside of the door handle
B. Squeeze the tabs on the inside of the cover caps.
C.
the handle so it curves to the inside.
D.
door where the handle was removed.
Installation Instructions
the inner door back into the outer door with the screws
the side opposite the handle.
Mount the assembled door on the 2 upper left side hinge
screws installed in step 2.
Move the hinge screws loosened in step 3 into the lower
right side front panel holes.
NOTE: