Cisco WS-C3550-12G User Manual page 161

Chapter 8 Interface and Subinterface Management
Figure 8-4
You can select one chassis, more than one Ethernet module, and more than one interface at a time
from the object list on the left side of the window.
The Ethernet Interface Statistics window contains one area, Packets/Octets Statistics.
Packets/Octets Statistics:
–
–
–
–
–
–
OL-4930-01
Ethernet Interface Statistics Window
Total Data (octets)—Total number of data in octets, including those in bad packets, received on
the network; excluding framing bits but including FCS octets.
Total Packets (octets)—Total number of packets, including bad packets, broadcast packets, and
multicast packets received.
Jabber Packets—Total number of packets received that were longer than 1518 octets (excluding
framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS error) or a bad FCS with a non–integral number of octets
(Assigned error).
Fragment Packets—Total number of packets received that were less than 64 octets in length
(excluding framing bits but including FCS octets) and had either a bad FCS with an integral
number of octets (FCS error) or a bad FCS with a non–integral number of octets (Assigned
error).
Packets with 64 octets—Total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
Packets with 65 to 127 octets—Total number of packets (including bad packets) received that
were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
Ethernet Interface Management Window
Cisco Catalyst Switch Manager User Guide
8-15