Connection Procedures And Precautions - Cisco WS-C2950-24 Installation Manual

Chapter 3 Installing and Connecting the Router
1. Cable color codes are specific to Cisco cables.
2. See the Cisco Modular Access Router Cable Specifications

Connection Procedures and Precautions

•
•
•
•
•
For cable pinouts, see
OL-18712-01
document for information about choosing these cables.
Connect each WAN, LAN, and voice cable to the appropriate connector on the chassis or on a
network module or interface card.
Position the cables carefully, so that they do not put strain on the connectors.
Organize cables in bundles so that cables do not intertwine.
Inspect the cables to make sure that the routing and bend radius is satisfactory. Reposition cables, if
necessary.
Install cable ties in accordance with site requirements.
Cisco Modular Access Router Cable Specifications
Connecting WAN, LAN, and Voice Interfaces
.
Cisco 2900 and 3900 Series Hardware Installation
3-45