Supported Sfp Transceivers; Sfp Transceivers; Sfp+ Copper Cables - Cisco SD2008T-NA Installation Manual

Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
1
3

Supported SFP Transceivers

The Cisco Nexus 2148T FEX supports SFP+ Ethernet transceivers. This section includes the following
topics:
•
•

SFP Transceivers

The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver is a bidirectional
device with a transmitter and receiver. It has a 20-pin connector on the electrical interface and duplex
LC connector on the optical interface. Currently, the Cisco Nexus 2000 Series FEX supports the
short-range SFP and long-range SFP transceiver.
the Cisco Nexus 2148T FEX.
Table 1-21
Model
SFP-10G-SR
SFP-10G-LR

SFP+ Copper Cables

Copper interface cables are available for use with the 10-Gigabit Ethernet SFP+ transceiver.
lists the available cables and provides a brief description of the cables.
Table 1-22
Model
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
OL-19013-05
Captive screws (2)
No blck stripe indicates front-to-back airflow
SFP Transceivers, page 1-37
SFP+ Copper Cables, page 1-37
SFP+ Transceivers Used with the Cisco Nexus 2148T FEX
Description
10-Gigabit Ethernet—short range SFP+ module
10-Gigabit Ethernet—long range SFP+ module
Copper Cables Used with the Cisco Nexus 2148T FEX
2
Staus LED
Table 1-21 describes the SFP+ transceivers used with
Description
10-Gigabit BASE-CU SFP+ Passive Cable
(1 meter)
10-Gigabit BASE-CU SFP+ Passive Cable
(3 meters)
10-Gigabit BASE-CU SFP+ Passive Cable
(5 meters)
Cisco Nexus 2000 Series Hardware Installation Guide
Cisco Nexus 2148T
Table 1-22
1-37