Appendix; Technical Specifications; Power Specifications - Cisco SD2008T-NA Installation Manual

Technical Specifications

This appendix describes the technical specifications for the Cisco Nexus 2000 Series Fabric Extenders
(FEXs) and includes the following sections:
•
•
•
•
•
Note Specifications for cables and connectors are provided in

Power Specifications

This section describes the power specifications for the Cisco Nexus 2000 Series FEXs.
The power supplies connect directly to the system through connectors attached to the baseboard through
cables. One connector is on the baseboard for each power supply. AC input is through an IEC connector
mounted on the power supply front panel.
Series FEX power supplies.
OL-19013-05
Power Specifications, page B-1
Environmental Specifications, page B-4
Physical Specifications, page B-5
Transceiver Specifications, page B-6
Airflow Optimization Accessories, page B-7
A P P E N D I X
Appendix C, "Cable and Port Specifications."
Table B-1 lists the specifications for the Cisco Nexus 2000
Cisco Nexus 2000 Series Hardware Installation Guide
B
B-1