Fan Trays; Supported Transceivers And Cables; Figure - Cisco SD2008T-NA Installation Manual

Cisco Nexus 2232TM-10GE, Cisco NexusN2K-C2232TM-E-10GE

Figure 1-22

1
1
2
To replace a fan tray, see the
descriptions, see

Supported Transceivers and Cables

The Cisco Nexus 2232TM-10GE Series FEX supports SFP+ Ethernet transceivers. This section includes
the following topics:
•
•
SFP Transceivers
The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver is a bidirectional
device with a transmitter and receiver. It has a 20-pin connector on the electrical interface and duplex
LC connector on the optical interface. Currently, the Cisco Nexus 2000 Series FEX supports the
short-range SFP and long-range SFP transceiver.
the Cisco Nexus 2232TM-10GE FEX.
Table 1-11
Model
N2200 FET
SFP-10G-SR
SFP-10G-LR
Cisco Nexus 2000 Series Hardware Installation Guide
1-22
Back-to-Front Airflow Fan Tray for the Cisco Nexus 2232TM-10GE FEX
2
3
Captive screws (2)
Black stripe indicates back-to-front airflow
"Removing and Installing the Fan Tray" section on page
Table D-1 on page
SFP Transceivers, page 1-22
SFP+ Copper Cables, page 1-23
SFP+ Transceivers for the Cisco Nexus 2232TM-10GE FEX
Description
10-Gigabit Ethernet for connections with a Cisco Nexus 5000 Series switch
10-Gigabit Ethernet—short range SFP+ module
10-Gigabit Ethernet—long range SFP+ module
Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
1
3 Status LED
D-2.
Table 1-11 describes the SFP+ transceivers used with
3-20. For LED
OL-19013-05