Cisco SD2008T-NA Installation Manual page 39

Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
For power supply specifications, see
"Removing and Installing Power Supplies" section on page
For LED descriptions, see
Fan Trays
The Cisco Nexus 2232TM-10GE FEX has one fan tray that is hot swappable during operations.
Depending on whether there is a cold aisle in front of or in back of the chassis, you can order
front-to-back airflow or back-to-front airflow for the fan tray and the power supplies in the same chassis.
Table 1-10
Table 1-10
Description
Front-to-back airflow
Back-to-front airflow
To see the components used when installing a fan tray, see
Figure 1-22
Figure 1-21
1
1
2
OL-19013-05
Table D-1 on page
lists the part numbers for each of the fan trays that you can use with this chassis.
Fan Trays for the Cisco Nexus 2232TM-10GE FEX
(back-to-front airflow).
Front-to-Back Airflow Fan Tray for the Cisco Nexus 2232TM-10GE FEX
3
2
4
Captive screws (2)
Handle
Cisco Nexus 2232TM-10GE, Cisco NexusN2K-C2232TM-E-10GE
Table B-1 on page B-2. To replace a power supply, see the
3-17.
D-2.
Part Number
N2K-C2232-FAN
N2K-C2232-FAN-B
Figure 1-21
1
3 No black stripe indicates front-to-back airflow
4 Status LED
Cisco Nexus 2000 Series Hardware Installation Guide
(front-to-back airflow) or
1-21