Tcp/Ip Setup Using Mac Os 7.6 Or Later - 3Com 3C892 - OfficeConnect ISDN Lan Modem Router User Manual

TCP/IP Setup Using
Mac OS 7.6 or later
If you are using Macintosh operating system version 7.6 or later, Open Transport
(OT) PPP is provided and installed by default. If you did not install OT PPP when
you installed your system software, perform a custom installation of your system
software and install OT PPP version 1.1 or later.
To set up TCP/IP for Mac, do the following.
1 From the Apple menu, select Control Panels and then select TCP/IP.
The TCP/IP dialog box appears.
Figure 30 TCP/IP Dialog Box for Macintosh Computers
2 Select Ethernet or Ethernet built in from the Connect via drop down list box.
3 If this LAN uses dynamic IP addresses, select Using DHCP Server from the
Configure drop-down list box. If this LAN uses static IP addresses, select Manually
from the Configure drop-down list box and then enter the IP address.

TCP/IP Setup Using Mac OS 7.6 or later

39