Flexible Calling; Configuring Fco On The Isdn Lan Modem; Flexible Calling Codes - 3Com 3C892 - OfficeConnect ISDN Lan Modem Router User Manual

Flexible Calling

Configuring FCO on the
ISDN LAN Modem

Flexible Calling Codes

Flexible Calling (also known as Flexible Call Offering (FCO)) is an additional service
added to your ISDN line to allow you to use voice features such as Call Conference
(Three Way Calling), Hold, Drop, Transfer and Message Service on telephones
connected to the ISDN LAN Modem's phone ports. If you are not sure whether
your ISDN line supports Flexible Calling, check with your telephone company.
In some cases your telephone company may enable Flexible Calling on your first
telephone number only. You may need to specifically request that these services
be enabled on your second telephone number as well.
Once Flexible Calling is provided on your ISDN line, you can either enable or
disable Flexible Calling (that is, all of the associated voice features) on the ISDN
LAN Modem on a telephone number basis.
By default, Flexible Calling is enabled on telephone number 1 and disabled on
telephone number 2. If your ISDN line supports Flexible Calling only on the first
telephone number, you should leave this default setting as is. If your ISDN line
supports Flexible Calling on both telephone numbers, you may want to enable
Flexible Calling on telephone number 2 so that you can use Call Conference and
Call Transfer from telephones connected to either ISDN LAN Modem phone port.
To enable or disable Flexible Calling, do the following.
1 Go to the ISDN LAN Modem's main configuration page
(
http://3com.oc.lanmodem/
2 Click ISDN Parameters.
3 Next to Flexible Calling Enable, select the telephone number check box(es) for
which you would like Flexible Calling enabled. Or, clear the telephone number
check box(es) for which you would like Flexible Calling disabled.
4 Click Submit.
Each Flexible Calling feature (that is, Conference, Transfer, Drop and Message
Service) has a code associated with it that allows that particular feature to be
enabled or disabled. By default these features are all enabled. The value displayed
is the code required for this service to work between the ISDN LAN Modem and
your telephone company. It is recommended that you leave the defaults set to the
standard, national values.
To change these values, do the following.
1 Go to the ISDN LAN Modem's main configuration page
(
http://3com.oc.lanmodem/
2 Click ISDN Parameters.
3 To disable a feature, next to Codes, enter 0 in the box to the right of the feature
you want to disable. To change the values, enter the appropriate value (provided
by your ISDN service provider) in the appropriate box.
4 Click Submit.
).
).
Flexible Calling
81