Finding More Information; Contacting Technical Support; Downloading Firmware To Your Isdn Lan Modem; Resetting The Isdn Lan Modem - 3Com 3C892 - OfficeConnect ISDN Lan Modem Router User Manual

C 9: T
100
HAPTER ROUBLESHOOTING AND
Finding More
Information
Contacting Technical
Support
Downloading
Firmware to Your
ISDN LAN Modem
Resetting the ISDN
LAN Modem
Resetting the ISDN
Modem Using a
Telephone
M
AINTENANCE
For more information about the ISDN LAN Modem, such as frequently asked
questions and specific technical notes go to the following URL:
http://www.remoteaccess.3com.com/support/docs/lanmodem/welcome.html
and then bookmark this site for quick and easy access. If you are using the ISDN
LAN Modem custom browser, click Updates from the menu bar.
For technical support, refer to the technical support card that was included with
your ISDN LAN Modem for the telephone number for your location.
Your ISDN LAN Modem has been designed to be user-upgradable. Firmware
upgrades and instructions will be available at
http://www.remoteaccess.3com.com/support/docs/lanmodem/welcome.html
There are two types of resets you can perform, a normal reset and a factory reset.
A normal reset resets the ISDN LAN Modem without affecting any of the
configuration that has already been done. Any active calls, however, will be
terminated.
A normal reset can also be performed using the reset button located on the back
of the ISDN LAN Modem.
A factory reset restores the ISDN LAN Modem configuration to the factory
default settings listed in Appendix C. All previously configured settings are
cleared and current calls are terminated.
To reset the ISDN LAN Modem, do the following.
1 From the ISDN LAN Modem's home page, select Maintenance.
2 Select the type of reset you would like to perform, normal or factory.
If your computer cannot communicate with the ISDN LAN Modem and therefore
you cannot get to the ISDN LAN Modem's home page, you can restore the ISDN
LAN Modem to the factory defaults using a telephone connected to one of the
phone ports.
Once you've connected an analog telephone to one of the ISDN LAN Modem's
phone ports, do the following.
1 Disconnect the ISDN cable from the ISDN LAN Modem.
2 Lift the handset of the telephone.
You may hear a fast busy tone.
3 Press the following keys: **3266#
The ISDN LAN Modem reinitializes itself. Wait at least 10 seconds to ensure
initialization is complete and then go on to step 4.