3Com 3C892 - OfficeConnect ISDN Lan Modem Router User Manual page 34

Figure 22 Network Dialog Box
8 From the TCP/IP Properties dialog box, select the IP Address tab.
Figure 23 TCP/IP Properties Dialog Box
9 Most users need to select Obtain an IP address automatically because most LANs
use dynamic IP addresses. If your LAN uses static IP addresses, enter the IP address
and subnet mask. (You can obtain this information from your system administrator
or ISP.)
10 Select Advanced and then check the box to set TCP/IP as the default protocol.
TCP/IP Setup Using Windows 98 and Windows 95
35