Stacking The Units - 3Com 3C410012A - OfficeConnect Remote 531 Access Router Getting Started Manual

Figure 2-1 Fitting the Rubber Feet

Stacking the Units

Use the stacking clips to stack OfficeConnect units together securely.
CAUTION: Never stack more than four units high. If the units are
different sizes, stack them by size—largest on the bottom, smallest
on top.
1 Stick the rubber feet supplied to the bottom unit of the proposed
stack
2 Place the first (bottom) unit on a flat surface and locate the slots into
which the clips fit.
(Figure 2-1).
Siting OfficeConnect Remote on a Desk 2-3