3Com 3C13755-US - Router 5642 Installation Manual page 79

Downloading ... CCCCC
After the baud rate at the console terminal is set, the new setting can become
valid only if the terminal emulation program is disconnected and reconnected for
at least once.
4 Select [Transmit/send file] in the terminal window and the following dialog box will
pop up:
Figure 77 Send File dialog box
5 Click <Browse>, select the application file to be downloaded, and set the protocol
to Xmodem. Then click <Send>, and the system will pop up the following
interface:
Figure 78 Sending file interface
6 After completing download, the system begins writing to Flash (Flash memory),
then the following information will be displayed in the terminal interface,
indicating that the download has been completed:
Download completed.
Writing to flash memory...
Please wait,it needs a long time .Please wait...
########################################################
Writing FLASH Success.
Introduction 77