3Com 3C13755-US - Router 5642 Installation Manual page 83

Build up FTP local upload/download environment
Figure 79 Building up FTP local upload/download environment
1 Connect the Ethernet interface on the router to the PC.
2 Assign an IP address for the Ethernet interface on the router. It is assumed to be
10.110.10.10.
3 Assign an IP address for the Ethernet interface on the PC. It is assumed to be
10.110.10.13.
4 Copy the application files, Boot ROM program or configuration files to a directory,
which is assumed to be "C:\ version".
CAUTION: The IP addresses of the network interface on the PC and the router's
Ethernet interface must be on the same segment.
Build up FTP remote upload/download environment
Figure 80 Building up FTP remote upload/download environment
10.110.10.10
Quidway R2610£¨FTP Server£©
1 Connect the PC to any port of the router through a WAN. This approach does not
require the IP addresses of the PC and the router to be on the same segment and
is used for upgrading the router remotely.
2 Copy the application files, Boot ROM program or configuration files to a directory,
which is assumed to be "C:\version".
Quidway R2630E
PC£¨FTP Client£©
WAN
Introduction 81