R E M O V I N G P L A T E - Nakajima AE-710 Operation Manual

MAINTENANCE
Removing Platen
The platen on your typewriter is removable making it easier to clean
or to remove jammed paper.
Removing the platen
1.1 Turn off the typewriter. Open the top cover and move the carrier
all the way to the right.
2) Pull open the paper bail toward you.
3) Push down the platen lock lever with your right hand.
4) While pushing down the platen lock lever, grip the platen knob
with your left hand and lift it up to remove the left side of the
platen from the main unit.
5) Pull the platen knob to the left, so you can remove the platen's
right shaf,t from the main unir.
Installing the platen
l) Open the paper bail then raise the erasure table and hold it up
with your right hand.
2) Reposition the platen on the cradle and insert the platen's right
shaft into the hole on the right side of the cradle in the main unit.
3) Grip the platen knob and push it down until the plaren's left shaft
locks into place. Be sure to align the groove on the platen's left
shaft with the platen holder stand.
4) Close the paper bail, then close the top cover.
.N
30