Nakajima AE-710 Operation Manual page 27

@.8
Creating frame by drawing vertical and horizontal lines
l) First draw the top and bottom horizontal lines of the frame. Hold
down the Shift key and press the Hyphen key, then press the
Repeat key to draw a horizontal line.
Note:
Setting margins at the desired width makes it easier to draw
horizontal lines of the same length.
2) Move to one line below the upper left corner.
Press the Backspace key then press the Half space key. The print
point indicator aligns with the left end of the top horizontal line.
3) Hold down the Code key and press the "V" key . A r ertical line is
printed. Then hold down the Repeat key until it reaches the
bottom horizontal line
4) Move the print point indicator io one line belou the upper right
corner
5 ) H o l d d o w n t h e C o d e k e y a n d p r e s s t h e " V " k e 1 . A r e n i c a l l i n e i s
printed. Then hold doun the Repeat key until it reaches the
bottom horizontal line
@.8
23